The Mixer for coatings, cast and plasters can perform the entire cycle (paddling, pouring of the coating, vibration) in vacuum conditions.
The incorporated vacuum pump is extremely silent and fitted with an original system for oil recovery and re-circulation which makes it entirely maintenance-free.
The paddling is obtained by a shielded-poles gear motor that makes the paddle rotate at a speed of 200 rpm.
The machine is supplied with a digital electronic Timer that can be used to set the paddling time.
As the pre-set time elapses (shown on the display), the paddling stops and the pouring and vibration can start.
During the pouring of the coating, the vibrator can be turned on and the intensity regulated.
This vacuum paddle and pouring processing assures excellent results, with compact coatings air bubbles and blowholes free.
The machine comes with a complete set of cups in transparent poly-carbonate:
– 1 cover with paddle,
– 1 coating cup with regulating tap,
– 1 cup for plaster,
– 1 inferior cup,
– 1 rubber base for cylinder.
